-
Removing the US limiting number
Please, please, please, remove the number limiting to US. I am from Panama (507), I would buy it from the US, I buy stuff from amazon and other estores every month and I travel there a couple of…
-
Same IP different MAC Address
Hello, I am getting an alert with my monitoring software that and IP address 192.168.5.10 hits my router at the same time every day but a different MAC address gets assigned every single time.…
-
More complicated configuration
Hi, I have a domain controller at home that I use for DNS and DHCP. I also have a static IP from my ISP. I don't see a way to configure a static IP on the Eero LAN port without enabling DHCP.…
-
Is it possible to allow incoming ipv6 connections?
Hi eero community, Now that eero has added support for ipv6, I've made the switch. However, I'm still having trouble allowing people outside of my LAN access my webserver via my globally scoped IPV6.…
-
eero speed test results - how does it calculate this?
I have noticed that the speed test result of eero is different than what I would get from various online sites like speedtest.net and speedof.me . My ISP service provides me 16Mbps down and 4Mbps up.…
-
stuck at white light blinking stage
Recently purchased my eero and suddenly it went from a working state to a stage where the white light is continuously blinking and it does not go to a final solid white stage.…
-
Consistently poor speed test results with Gigabit
I finally got a consistent speed test result: http://www.dslreports.com/speedtest/37313200.png My eero router automatically tests daily, but I was never seeing above ~300Mbps.…
-
Why does my PC connect to my most distant eero?
I have three eero's in my house, all hard wired over cat5e/cat6 cable. The Gateway is in my basement, two floors below my PC. The PC itself is a few meters away from an eero in the same room and…
-
Eero Pro (2nd gen) vs Zyxel Multy X
Hi Gang. I have been a longtime Eero fan and own the Eero pro system (2nd gen) in my home. I never had any issues with the system and coverage was good. Recently though, I tried the Multy X by Zyxel.…
-
Double NAT
Will be having an Eastlink Tv Maestro box installed for cable television. It has features that apparently require its DHCP to be active to work with its remote tv boxes through the house Current…
-
3rd party compatibility
I have a cable modem (no router Arris TM822) going into a Luxul router XBR-2300. The router feeds various Luxul switches (XMS-1024) and the switches feed (among other things) access points which are…
-
Does each individual Eero in a mesh network act as a router in processing data?
Hope this makes sense, but I was wondering if each individual eero processes data, for example file transmissions between an NAS and a computer, independent of the gateway eero,…
-
Ads getting through eero Plus filter
Since yesterday, seems more ads are popping up. Some ads normally get through but an unusually high number seem to get through this morn. Only thing that changed from my end was installing…
-
4 different networks and no eero update available
All of our networks show as up to date. However, none have the latest firmware released on July 26. What is the issue where all of these are not seeing new software?
-
Smooth sailing update 3.8.2-18
Very easy eero update tonight. Running iOS 12 beta yet no issues. Took a whole 8 minutes to download and update 4 eeros and 2 beacons. Easy and fast. Lost signal for maybe a minute or so.…
-
Connecting My Ethernet-PC-USP-connected Printer via WiFi
I seemed to have solved my problem, but in a somewhat odd way. I have two Windows 10 PC's. If I connect one via the Ethernet port on the back of the eero base, and the other via WiFi only,…
-
Missing Sunday eero Plus report - again
Confirming another in a series of missing Sunday eero Plus reports. Have reported this to eero support several weeks ago and have exchanged multiple emails.…
-
eero app - delays after pressing Connected Devices button
Occasionally (randomly) when I press the Connected Devices button, there is a 4-5 second delay before the list of devices comes up. Often I just force close and when it reopens,…
-
System Update in Progress, even though everything is back up
Updated to the 3.8.2-18 update this evening and after about 10 minutes all my three Eeros came back up and all my devices reconnected without issue. However it's been about 30 minutes since…
-
Eero port and PoE (not PoE for the Eero itself)
Good day to all that read this. I am looking to extend my network 1000+ feet out to the end of my driveway, so I can install a security gate, and security camera.…
-
Ad Blocker seems to be getting less effective
In the last few weeks (?) the ad blocker is letting more ads slip through. It's especially noticeable on sites that I visit all the time. Has something changed?
-
App shows eeros offline - yet all are online
Needing help this evening. Everything was smooth sailing.... but... Currently 5 of 6 eeros showing red and offline in the app... yet they are all online, showing white lights on each eero,…
-
One of my 4 eeros is a gateway why?
I have a Gen 2 connected to my DSL and the G2 eero connected to a gig switch. The other two eeros are hard wired to the switch and the 4 is a Beacon. The two hard wired eeros also have a switch…
-
throttle or BW limit a device on my network?
I have a device HP (HP03F4C7) printer that seems to be always TX and RX on my network and I want to ideally cap its max RX and TX to the Internet. the ideal scenario would be:…
-
PLEX Support?
Is there a recommended way to handle Media share devices on eero? right now I have a WD world book gen 1 with ethernet port plugged into a switch that is connected to one of my Gen 2 eeros.…
Content aside
Category actions
Need Help? We're here for you!
We're big on support, and we want to make sure you always have the best eero experience possible. Here are several resources you can use if you ever need our help!
Quick links
