Hi. Desperately need eero to improve roaming/faster switching between devices in for iOS and macOS devices. It’s a matter of reflecting the roaming protocols in apples guide https://support.apple.com/en-us/HT202628

Optimize for Conferencing and Gaming:

Contacted support about this and they reply that it is not supported yet with Eero pro 6 😑

Good afternoon - I noticed that when the enhanced WPA3 security is enabled my sons iPad was not able to join. When I researched the issue I found a thread from someone else on an Apple chat board that had the same issue with an older iPhone. I turned off the added WPA3 security in the eero beta and it was able to connect without issue. 
 

the issue seems to be with older Apple devices that have not been upgraded recently. My personal phones and iPad connect with the WPA3 enhancements enabled. 

hope this helps

Hi eero Team,

simple Feature request I just want to shut down the ssid (wifi signal) completely at night maby with the profiles... But I just want an automated workflow and less emissions. ;) Would be really great and important to us... Greeting 

Mostly just makes my connection slow! I got 1GIG fastest available but I can’t even finish a zoom interview 

Hello Eero Labs:

Great stuff so far. Few competitive suggestions:

1. Better network diagnostic tools - as a user it is hard to distinguish what caused an internet connection to be faulty this not just for a simple on/off connection but more specifically for streaming (zoom calls, or gaming). It could be the ISP, the actual eero hardware connections, the wifi signal, and also peripherals in between such as caldigit TS3 plus network interface. Or the computer itself. So many fault lines and no easy means to tell which one while on a call. 

2. Device bandwidth breakdown - be able to tell which devices used the most communications and over time would be great. This would help determine if a device is sucking up bandwidth or cluttering the network with excessive pings, making the routers unable to process other calls on the network.

3. ability to VPN specific device out to other locations. This is specific to gaming, and helps make a PlayStation/XBox look like they are in a foreign country.

4. WPA3 whitelist - the molecule devices on my network are not able to handle WPA3 just yet so having the ability to ignore certain devices would be great.

5. Routing resolution - be able to show what devices are communicating with (ex iPhone 12 connected to Instagram, google, ... )

thank you for your help with this.

WPA3 features do not play well in conjunction with myQ devices.  myQ devices won’t connect or work when this feature is turned on.  I tried with band steering and 5 ghz features on and off- it is there WPA3 feature that acts as a block.

Good afternoon. I am writing this post while I am sitting no too far from one of my 3 eero6 extenders in the first floor of my house, called office. The problem that I am having,  is that the system prefers to connect to the main router that is on the second floor (guest room), instead of connecting to the mesh in the first floor,  very close from me. I enabled the beta option to steer signal (band steering) , but no luck with that as well. My phone wifi icon has two out of three bars. My Vizio TV in my third floor, is connecting to my extender on the first floor called office.

Any advice?