Problems with latest Eero 6 Pro update and Wemo Mini smart plugs?
I was gone from the house for about a week and there was at least one, brief power outage. When I returned home, I see that there was also an Eero update while I was gone. After returning home all 3 of my Wemo Mini Smart Plugs were offline. When I factory reset them and try to re-add them to Wemo and HomeKit, the whole process work perfectly until the very end, but then the configured Wemo mini smart plugs will not connect to the WiFi. Temporarily halting the 5 gHz band has no effect, nor does setting it to Legacy mode.
Did the power outage fry all 3 of my smart plugs, but nothing else, or did something about the Eero update make the Eero Pro 6 incompatible with Wemo Mini Smart Plugs.
I was able to get some replacement Feit smart plugs (2.4 only) to connect and work just fine, but they do not work with HomeKit like the Wemo ones do.
Same problems here. Have tried just about everything to get my wemo plugs and light switches/dimmers to work. We have at least 7-8 plugs and maybe 10 switches/dimmers in the house, and it is so annoying having half of them disappear/not respond until doing a reset and only having them work for maybe a day or two before they kick back offline and just flash orange and white continuously. Seriously sick of the headache and WeMo appears to have 0 support on the issues. I have seen a couple people mention that setting a dedicated IP might help so I will try that to see if it magically helps but I somehow doubt it. Really hoping for a reliable solution other than replacing everything with the hefty investment already made into the WeMo products. Will likely never buy another belkin product again.
I still have one WEMO switch, and of late it seems to be working OK with WEMO app. I don’t really use the app, as it is programmed to turn on 1/2 hour before dark and to go off at midnight, for my outside Christmas lights. They are unplugged after the Christmas season, so not really an issue going on/off all year round. The only reason that I checked lately was curiosity.
I switched my plugs to Eve units. They work well, if a little laggy on Bluetooth. I upgraded my Apple TV 4K to latest version and was able to use Thread, which made the Eves respond immediately. But now the Apple TV refuses to act as the border router for the thread network, and I’m back to the slower BT connection. So now I have another compatibility chase, but at least Eve and Apple seem to be helpful trying to sort out the problem. Just no luck so far.
For switches, I replaced my WEMOs with more Insteon switches, which now seems like a bad plan in light of the recent vaporization of Insteon and parent company, but fortunately as I am using HomeBridge, the devices are still working in HomeKit. Just can’t use the Insteon app. Not sure if I’ll be able to install my one last Insteon switch that is still in the box (it was intended for that last WEMO location, but I might try it in another location).
When Eve comes out with their Thread capable wall switches I may upgrade from Insteon (assuming that I can get the Apple TV Thread working).
IOT, still not ready for prime time yet.
After weeks of frustration, I found a post on a Best Buy thread and it worked. The key is disabling 5GHz BUT ALSO following the instructions to do a RESTORE on the plug before you add the accessory.
Instructions to restore: https://www.belkin.com/us/support-article?articleNum=317782