EERO Pro WiFi "stickiness" with iPhone

I recently replace my 1st generation Google WiFi with the new Google Nest Wifi and I also updated my internet speed with Frontier Fios to 500/500.  Unlike the 1st generation units,  the new Nest WiFi remote APs cannot be backhauled to the main hub since they are completely wirelesss.  The performance around my house (4,000 sq ft) was quite poor despite the Google's claims of greater range coverage for the new model and it would require many more remote APs than I was willing to purchase for better coverage.

The good news is, I returned the new Google Nest Wifi pack and purchased  three eero Pros which are wired to my home network, and has resolved the speed and coverage issue.  I am now receiving almost the full 500/500 bandwidth in each area of the house.  

The problem I am experiencing is with my iPhone XS Max.  I have read elsewhere that the iPhone tends to aggressively hang onto a WiFi AP.   I can be standing right next to a wired eero upstairs but I am still barely connected to the eero downstairs at the front of the house - the iPhone will never switch to the closer eero even if I leave it there for a couple of hours.  A speed test shows about 7 Mbps down and 3 Mpbs up.  When I am standing next to the eero unit that the iPhone is connected to downstairs, I see throughput approach 400Mbps up and down. 

So, this may totally be an iPhone issue.  But my 1st generation Google WiFi units, which were also wired, did not ever show this behavior.  The iPhone seamlessly moved between the wired APs in the house maintaining a strong connection.  The issue is frustrating because no matter what I do, restart the iPhone, disconnect and reconnect from WiFi, forget the network and re-authorize, the iPhone never releases the connection to the distant AP.  At night, when I am upstairs, if one of my Google Nest security cameras triggers a text alert, I cannot connect to the cameras through the Nest App to see what is going on - this is caused by the extremely low throughput the iPhone is experiencing as I described above.

As good as the eero Pros are, I am considering returning them because of this issue.  I think the eero team should attempt to solve this through software or rexamine this issue with the iPhone.

3replies Oldest first
  • Oldest first
  • Newest first
  • Active threads
  • Popular
  • Same issue with my install with a 11 Pro Max

    Like 1
  • Search the threads, this is a common complaint.  Unfortunately, Eero continues to blame the clients.  I have some that refuse to connect to the AP in the same room.  Others will connect to the one in the same room if you turn Wifi on or off.    I recently did a test with my older ASUS AP's and the hopping between the two was automatic, thus ruling out the client.   Wish this was fixed.

    Like 1
  • Apparently Eero are making headway on the "sticky client" issue. I've noticed our two iPhone 11 Pro Maxs are roaming to the appropriate node more often than not since firmware 3.18 and 3.18.1 were released. We rarely see our phones connected to a node at the wrong end of the house now. (nice one Eero!)  

    Like 1
Like2 Follow
  • 1 mth agoLast active
  • 3Replies
  • 105Views
  • 5 Following

Need Help? We're here for you!

We're big on support, and we want to make sure you always have the best eero experience possible. Here are several resources you can use if you ever need our help!

Quick links

Community Guidelines

Help Center

Contact eero support