1

LAN Not Working When Internet Service is Down

My internet service was dowm for about an hour. During that time, all 3 of my eero pro routers had red lights. I'm the eero app, e etthing showed as being offline with zero devices connected to the network. And that is what I don't understand. The Wi-Fi network should have still been functioning. But I couldn't print to my wireless printer. If this is true, why doesn't the LAN work just because the WAN is down? 

42 replies

    • jaygee
    • 3 yrs ago
    • Reported - view

    This is still a problem. I have two wired Eero Pros and one wireless Eero Pro. Our ISP went down and I couldn't access anything on the local network, including accessing my modem to check the status of my internet connection (the modem is at 192.168.0.1). The Eero app didn't show that the internet was down, in fact it wasn't even showing current state of anything on the network. After rebooting the gateway Eero, the app just reported everything down.

    What's the point of having an Internet section in the app that reports it as Online, if it can't report when it's offline?

    My Eero firmware version is 6.1.1

      • AngryPirate
      • 3 yrs ago
      • Reported - view

      jaygee yeah, it’s not 100% but if there isn’t a reliable connection through your modem to your ISP, things on your LAN don’t connect properly.

      I had enough. Since I purchased through Amazon and not Eero directly (owned by Amazon, but I guess it matters), I had to go through Amazon and with it being 6 months old, I feel like this problem isn’t all that uncommon since Amazon didn’t really give me much push back and returned me 90% of my purchase price (10% restocking fee).

      I’m using an ASUS ZenWifi and it’s behaving like I’d expect a network system should.

    • jpcirig
    • 3 yrs ago
    • Reported - view

    I have the same issue.  When the internet goes down (i'm rural - it happens), I lose everything on my LAN such as smart thermostats, switches, etc.  Incredibly frustrating.  Can't even restart the eeros.

    • vitoasaro
    • 3 yrs ago
    • Reported - view

    I also have the same problem with the Eero 6 Pro.  I have 4 of them; 2 connected via Ethernet port, and 2 of them via WiFi mesh.  When the Spectrum Internet goes out, ALL of the Eero's have red LEDs, and there is no local LAN persistence, so everything on WiFi disconnects (the Eeros haven't been power cycled).    The local LAN (WiFi) should remain up when the Internet goes down.  Also, when the Internet does come back online the Eero's can take up to 30 minutes before they return online, and often need to be power cycled to restore the WiFi.  This is unacceptable.

     

    Eero support: how can the Eero 6 Pros be configured to maintain their LAN persistence and not turn red/drop WiFi whenever the Internet goes down??

      • jpcirig
      • 3 yrs ago
      • Reported - view

      vitoasaro I agree, it's very frustrating.  Since my last post, I've spent countless hours on the phone with eero.  The bottom line: eero LAN works when the internet is up.  When it's down, eero's position was "tough - eero is could based, so it needs the cloud".   Very frustrating.  

    • catalina
    • 3 yrs ago
    • Reported - view

    I would venture to say that the required internet connection is by design and eero isn’t being forthcoming what’s up?  My theory is they want to prevent firewall packet filtering devices from being added between the isp router and wifi device. I ran a wireshark trace why do you do wait for for internet connection to be live why? is my profile or telemetry/logging needed to be online first before you turn on my LAN. Are you trying to prevent people from using packet filtering devices because that is what is happening.  
    I am sad that you don’t allow via your latest firmware updates to add devices that protect my privacy.    
     

    • greyscale
    • 3 yrs ago
    • Reported - view

    I'm having this exact issue with the Eero 6 Pro I just bought. I opened a support ticket before finding this thread. I'm shocked this has been an issue for two years and not fixed.

    • rjbur
    • 2 yrs ago
    • Reported - view

    Well son of ...... my Xfinity went down and my whole house went down!  This is unacceptable, especially when using home automation such as Home Assistant where much runs locally.  Anyone find a solution?  Even if it’s another mesh network system?  I placed my own topic here as well as just sending a support request.  They’ll be going back to Best Buy if they can’t fix this… sure glad I have Geek Squad coverage on these… I picked up the unit in my office and Wow do they get Hot!   

    • tzavecz
    • 2 yrs ago
    • Reported - view

    3 year old topic, apparently still doesn't work. My eero and client will not transmit a wifi signal if the internet is down. eero server is connected to my DSL modem and LAN with Cat 6 cable. No reason why WIFI and local LAN access should be down even though I cannot get WAN access. You are selling Wifi systems rather than internet repeaters, aren't you?

      • cMoo92
      • 2 yrs ago
      • Reported - view

      tzavecz LAN persistence (local devices still communicate while internet is out) is something eero has supported for a few years at this point. I even just tested it again tonight on my eero network by disconnecting my eero from the internet, waiting for the red light, and then checking connectivity between devices and had no issues. 
       

      When you mention your “client device” won’t communicate during an internet outage, what type of device is it? If it’s a mobile device, it could be detecting there’s no internet connectivity through WiFi and thus switching over to use cellular. If that’s not the case, I’d recommend reaching out to eero support so they can investigate.

      • tzavecz
      • 2 yrs ago
      • Reported - view

      cMoo92 I thought I made it clear as to the type of devices. I have a cable modem using phone lines for internet. eero pro is cable connected to a router that accesses the cable modem and my LAN. Storm killed the phone line/cable internet for a day. When it did the eero server and clients went red and WIFI transmission went to zero.
      I tried an unplug and a manual reset of the Pro. did not restart local wifi.

      Multiple PC's, Synology NAU media disks worked just fine on LAN but WiFi transmission was dead throughout residence for all tablets, phones, TVs using WIFI.

      Prior to this EERO-only provided my local WIFI. At this point the WIFI was now dead. I then turned on WIFI from my cable modem (i.e. this wifi was NOT operational when EERO was transmitting). At this point, even though WAN was down, I now had access thru entire house to my LAN networked devices but the EERO was still not transmitting.

      EERO WIFI does not work work when the WAN internet signal is lost. Now that phone lines are up and going, EEro is working fine but I had to manually reset each client and the EERO pro modules.

      • fede
      • 2 yrs ago
      • Reported - view

      tzavecz same here with 2nd gen eeros. The gateway is wired to the local LAN through a switch. When internet is down I lose all WIFI access to my local LAN, either wired like my NAS or wireless. Suffice to say this is a deal breaker for me too and it has been long enough with this ridiculous problem. 

    • mrsaxy
    • 2 yrs ago
    • Reported - view

    As much as I like the eero system, this one thing is a deal breaker for me and the reason I no longer run eero on my network.

    • rjbur
    • 2 yrs ago
    • Reported - view

    Well I had it.  Returned my four (4) EERO Pro 6 units to Best Buy and spent the extra to buy the 3 pack of the NETGEAR - Orbi AXE11000 Quad-Band WiFi 6E Mesh System.  Yes, its costly, but they claim it will keep up the local internal house network even when the outside provider goes down.  These units have a fourth wireless band they use to talk to each of their units.  Now I just realized I need to test this new setup so I'll have to come back and report.

    What finally killed the EERO is I simulated a down internet provider by disconnecting my cable modem.  For a short time all my units were flashing a white LED color and the "intranet" local network still functioned.  I could access my NAS downstairs from my office upstairs via the EERO network.  Then after sometime passed, all four of my EERO units went solid RED and my local "intranet" network went down.  I could no longer access my NAS, Home Assistant smart home was down, the "home" network was down.  This should NOT ever happen.  Local Wi-Fi should never be contingent on having an external "internet" connection.

    Ok, so hopefully later today I'll be able to try a simulated down internet connection with my new Orbi units and report back.  First, I have many body parts to cross, a few prayers and offerings to the network gods, as well as breakfast and walking the dogs to get done...

      • Zaurian
      • 1 yr ago
      • Reported - view

      rjbur How did the Orbi work out for you?  Does their solution solve this issue?

    • Zaurian
    • 1 yr ago
    • Reported - view

    I just spoke with EERO support. The call went to their third level support, where I was informed that LAN Persistence is only supported in Routed mode, not Bridged mode.  Therefore, if you lose Internet connectivity and you use EERO Bridge mode (as most IT professionals will do), your WiFi network is no longer going to work (it's more complicated, but keeping it short... some traffic will get through making it the issue that much more frustrating to identify).  I have 7 EERO Pros and I have evangelized how awesome EERO is to industry peers (I am a Network Solutions Architect) but now I feel so foolish for having done so ... I've already started to clear it up with folks I have made recommendations to, and to find a wireless solution that can stand on it's own.  Apparently it's been a known issue with EERO for many years and remains unaddressed. I loved EERO until I figured this out. Hopefully I can find a suitable alternative that performs as well but without the limitations.

      • uvadtmfub
      • 1 yr ago
      • Reported - view

      Zaurian my eeros are in router mode, and the LAN persistence still doesn't work 

      • Michael_eero_support
      • 1 yr ago
      • Reported - view

      uvadtmfub Make sure to give support a call then so things can be checked into

Content aside

  • 1 Likes
  • 1 yr agoLast active
  • 42Replies
  • 2150Views
  • 20 Following