How to enable Javascript

Latest Posts

Re: eero Labs - WPA3 feature recently broke old iPad connection. iOS 9.3.5 and IOS 11.4.1 both can’t join network if WPA3 feature is enabled. @iAMme WPA3 Transition Mode requires iOS 12.2 or later. They were aware of this one day one. See this article: https://support.eero.com/hc/en-us/articles/360042523671-What-is-WPA3-
- thatsthequy
- Enthusiast
- thatsthequy
- 2 wk ago
- 1
- Discussion Topics
- Reported - view
Re: Issues with Eero Pro mesh network. I have a similar home layout to you. I would suggest "staggering" the units position between the floors, so that they are not directly on top of one another.…
- thatsthequy
- Enthusiast
- thatsthequy
- 2 wk ago
- 1
- Discussion Topics
- Reported - view
Re: Band Steering The client makes the decision on what band it connects to, eero can only encourage it to use 5Ghz when "Band Steering" is enabled. If your laptop is falling off 5Ghz,…
- thatsthequy
- Enthusiast
- thatsthequy
- 2 wk ago
- Discussion Topics
- Reported - view
Re: I swear I am DONE with Eero @Kdcdq Are the TP-Link APs wired in, or wirelessly uplinked? Were the eeros they replaced in the same wired/wireless config? What are "poor WiFi speeds" for you?
- thatsthequy
- Enthusiast
- thatsthequy
- 2 wk ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Myckel What ISP and what model of modem/router? Instructions usually can be found on your ISP website.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Myckel Make sure your ISP equipment is in bridge mode.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Heres your EEERO BECON @Freakinkat YT Where is it being used? An oven?
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- 1
- Discussion Topics
- Reported - view
Re: Eero reliability when internet is down I would double-check that nothing is trying to reach out to the internet. Plex works for me as well if I disconnect my internet.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Change of MAC Address at reboot Don't assign IPs to eero nodes. If you are running them in bridge mode just let them fetch via DHCP.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Cannot access MoFi router administration interface behind Eero Try manually forwarding the port to the client device you are using to try and connect with.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Improve eero wifi for older devices If the gateway eero is stuffed away in a cabinet, that likely hurts it signal significantly. 3 cupcakes are rated for 5k sq ft when all placed optimally.…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Eero and Synology NAS with Bonded ethernet ports I am not 100% about this, but doesn't the switch you are connecting the NAS to have to have LAG enabled on the four ports its connected to? Did you ever confirm you had 4-gig bandwidth to the NAS…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Heres your EEERO BECON I don't exactly see what the problem is. Is your beacon shutting off due to overheating?
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Ipads unable to join the network @Msada If they are running iOS 12.2 or older, make sure WPA3 is disabled in eero Labs.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: Gigabit connection but pathetic WiFi from eero Testing Beacon placement can be difficult since they don't have any ethernet ports on them. With good placement I am able to get 170-200Mbps from my Beacons when my iPhone/iPad/Mac is connected…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Ruederic If its an Apple TV 3rd gen or older it will not work with WPA3 on, due to it running an older version of iOS. https://support.eero.com/hc/en-us/articles/360042523671-What-is-WPA3- There…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Kdstew3 Try "Optimize for Conferencing & Gaming" in eero Labs!
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @SEAD Have you tried enabling "Optimize for Conferencing & Gaming" in eero Labs? This should help balance out the available bandwidth over devices on your network.
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Lizzykat You might need to move the eero node closer to your computer. If your computer has an ethernet port, it would be best to wire it in to an eero node to rule out the wireless on the computer…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Kdstew3 Under the "Discover" tab in the eero app. It has now been renamed to "Optimize for Conferencing and Gaming".
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Chris If your iPad is running iOS 12.2 or earlier, it is not going to work with WPA3 enabled. https://support.eero.com/hc/en-us/articles/360042523671-What-is-WPA3-
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @TSchenck Any devices that have been seen using 5Ghz will be added to the list. Unless you have a stationary device right on the edge of the network coverage then maybe it will not make the Band…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @pakiriffic What device is this happening on? eeros will not drop clients unless it is overheating (30+ Celsius) or is overloaded with too many clients (think over 100 per node).…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @Ede How long has Band Steering been enabled? Once it connects once via 5Ghz, eero will favour that preference when the device roams or rejoins the network.…
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view
Re: eero Labs features and feedback thread @omatus Please make sure your iPad is running iOS 12.3 or newer. iOS 12.2 and older is incompatible with the WPA3 feature ( https://support.eero.com/hc/en-us/articles/360042523671-What-is-WPA3- )
- thatsthequy
- Enthusiast
- thatsthequy
- 1 mth ago
- Discussion Topics
- Reported - view

1 2 Next

Back to top

thatsthequy

thatsthequy

Enthusiast

Vancouver, BC

27
3
0

Follow

I get around on two wheels.