Offline WLAN access
Is there any update to when offline WLAN access will be supported? It's frustrating to not be able to use my WLAN if my modem is offline (i.e. accessing Plex or other media services)
39 replies
-
I just bought a set of these and found out first hand that you can’t do anything with these offline, and it requires internet and a creating a super creepy IOT account just to set it up as a simple access point. What a joke. eero is basically the Juicero of mesh WiFi. I can’t take these back fast enough.
-
This is a major design oversight - given the eero is supposed to be for the connected home. In a connected home the "Fail safe" has to be that the network works in the last know state. Even if it can't be administered or updated. Right now - internet connection dropping + power cycle means no internal network.
Please fix this as a priority. -
As I was looking through the Feature Requests, I noticed this particular request, which I find of real value added, does not even indicate what the status is ... is this under consideration or is this one of those items that will flat out never get implemented? If so please just say so. An explanation as to why would be nice as well. Thanks
-
WTF! I purchased eero to control my X32 rack digital mixer which will never have internet connection. This thing is useless for me now!
-
Hello. As a long time Eero owner ( I was an early adopter) I want to bump this thread and as an enterprise technologist who specializes in networking with 20 years in my field, I want provide those of you asking questions with a little insight into this problem.
First off, it’s obviously been this way since day one. The reason it does this, and most likely the reason they won’t comment on it, is because the way the Eeros were designed initially, in my humble opinion, had a flaw. They had no form of configuration redundancy, preventing off-line operation, but I’m sure this was intentional because of the hardware utilization gains is it provided.
Unfortunately in today’s technology marketplace too many companies are taking shortcomings and calling them features. Add some old person somewhere used to say, it doesn’t matter how much you polish a turd, it’s still a turd.
In this case, this limitation results from the way the system is built. Essentially the routers you have in your home are little more than dummy clients. In other words, the operating system, or the brains of these routers, is hosted almost completely online. This gives them the ability to run the routers with less of a footprint getting more bang for their buck out of the hardware. The unfortunate but obvious cost is the routers themselves have very limited capabilities on their own.
Now, I’m guessing here but they probably won’t do anything about this because it would require a complete retooling of the software, and more than likely the hardware as well. There may be ways they could do it simpler but the scope of the effort depends completely on how the existing systems are built.
I don’t understand why they’ve remained silent on this for so long either though. While the silence tempts me to think this isn’t a simple issue for them, choosing to ignore everyone here who is begging for this indicates customer support deficiencies more than anything else. It seems to me like they could have redesigned to allow the routers to store the last known configuration from the servers in order to fall back to it in the event of a loss of network connectivity. But, what do I know? I only do this for a living!
As a heads up, this would most likely require them to increase some of the resources in the routers (i.e. memory, storage, etc), which means it wouldn’t be something they could push to existing devices. That means we would only get the new functionality by going out and purchasing completely new, expensive routers. I would imagine it’s possible to get this going on existing hardware, but I’m sure that wouldn’t be the path of least resistance. In other words, it won’t be cheaper or quicker. Most things of this nature are little more than a function of time and money. Given the high prices each and everyone of us paid for these devices, I would venture to say they have both and are choosing to drop the ball here.
-
Jeff C.
i appreciate the quick response on this topic.
After all that, I still do not have a clear understanding on where Eero stands on this “functionality”. I simply wanted confirmation that this is still being looked at and if so what priority does it have comparitivley to other requests in the chain. You guys have made so many updates so far (thanks for that!) and I am simply confused as to why externally something so basic to a “network” is not an option.
Thanks
-
I am a new Eero user but have just recently discovered this glaring design flaw. I get that the having an internet connection will keep the Eero's healthy, etc., but it STILL needs to boot as a stand alone LAN with no internet connection.
I have a rather flaky WISP (wireless ISP) that goes down quite often. I bought a Netgear LB2120 device that sits between the ISP modem and the router. When I lose signal from the ISP, it will hot swap to LTE cellular data - pretty slick. However, the Eero doesn't seem to like having it's provider signal hot-swapped on it, and the network must be restarted to get it to function. For that reason along with the inability to run in LAN mode only I may likely dump the Eero altogether.
I DO understand that the ask is a lot of work - I make my living in IT - but this should be at the TOP of your list. Anything else I would say now would be repeating what has already been said - but I do want to add my request for this feature.
jim
-
Same concern. Ready to replace Eero. Loss of Comcast combined with a reboot can’t mean losing my LAN. House now depends on WiFi for too many things.
Or for example, building a new house where Comcast isn’t ready yet means none of the new “smart home” devices have a LAN if I use Eero. So no Eero.
-
So I have had an isp issue for the last 2 days. I’m sure anyone working for eero completely understands that not resetting your router during the troubleshooting process is neither realistic or rational. The really funny part of this is that when my home network went out, I pulled out my 10 year old wireless router and used it to set up my home network. Good thing I am a pack rat I guess.
There is really no excuse that a new and really expensive router like eero doesn’t function when my 10 year old one does. Is there a fix for this issue coming? When will it happen? All I see in this thread is deflection of people’s very legitimate concerns. I can tell you that if I don’t hear from someone on this soon with a straight answer and a timeline for a real fix (this thread started over a year ago, you have had plenty of time to work on it) I will go to more public social media with this complaint and recommendation not to purchase. There is no excuse for this guys.
-
When I first set up my eero a few months ago I just assumed that the mobile app was a convenience feature to use instead of the common web configuration. That is until I had issues with ISP and wanted to troubleshoot the network to make sure the ISP was to blame. Finding out that I can’t do any troubleshooting on the LAN is, frankly, shocking. Even more shocking is losing basic LAN functionality if you lose power. That seems like something that should have never made it out of QA, not something to sit on for over a year. Does erro even have a product management team or just app designers? I now wish I had went with Netgear or Ubiquity for my solution. I won’t be recommending erro to anyone anytime soon.
-
Hi everyone -- thanks for your feedback. As of today with eero OS 3.9 this issue is fully resolved. Appreciate everyone's input and patience.
-
Thank you!!
Content aside
- Status Implemented
-
32
Votes
- 5 yrs agoLast active
- 39Replies
- 4771Views
-
26
Following
