Fing reports Network netmask (prefix length) is not tuned correctly
My fingbox keeps reporting the following:
Network netmask (prefix length) is not tuned correctly
Home network is too wide: 192.168.4.0/22, up to 1024 devices
Is there a way to fix this on my Eero Pro? I don't see a way for Fing to ignore the alerts.
Code 406: Network netmask (prefix length) is correctly configured
Failure case: Network netmask (prefix length) is not tuned correctly
Network check: information are gathered from your current network
The check verifies that your network subnet mask (or network prefix length) is not oversized. Although networking standards recommend to always prefer multicast and broadcast when searching for networking services and devices, many modern IoT devices have still been using unicast sweeps to find peers: this means that lookup, onboarding, pairing or service usage when you have a big network will make the device lookup for the service on a very big number of possible devices, instead of just 256/512. A good example of this is also Windows workgroup: NetBIOS is unicast, so lookup of other PC and printers in a big network takes much longer. The same happens as well to network monitoring software like Fing, Fingbox, and so on: these apps leverage ARP-sweep or ping or similar, so the time taken by a network discovery is proportional to the network size.
What it means for me
A subnet mask is a number that defines the range of (IP) addresses available within a network. It uses the same format as IP address, but in negative format, e.g. 255.255.255.0 is a typical Class C mask including a range of 256 addresses. An alternate form to express it is as network prefix length, meaning how many bits of the network address are stable: a class C network is /24, meaning that 24 bits, first 3 bytes of the address, are not varying.
How I can fix this
An oversized network is much slower than a correctly sized one. E.g. a home network with dozen devices not being a Class C is definitely not tuned correctly. In order to fix it you don't have to change your local PC configuration but rather login into the router configuration and edit it. To make sure every device gets the new updated configuration you should also power cycle or reconnect all connected devices.
Same issue here. No idea why. restarted network, troubleshooted ISP... Changed DNS... nothing.
OK, but where can I access this field to edit it? I don't see anyplace in the Eero app that gives access to this. Trying to log in directly to the eero is denied...
Has this been addressed? I’m getting the same error.
I appreciate what you did.
Based off what the OP posted it looks like you just need to change the subnet mask to change it to a class C. I didn't see a list of any troubleshooting steps taken so far so I will suggest changing to manual IP which is in Settings -> Network Settings -> DHCP & NAT. Select Manual IP and you will be able change the subnet to 255.255.255.0 which should solve this. Can anyone give this a try and let me know if the device is still reporting the message?
He is referring to the subnet mask. By default, it is 255.255.0.0. Change it to 255.255.255.0.
I am getting the same issue/notification from Fing. When I do the above in Manual IP and enter the 250.250.250.0 it says I also need to enter Subnet IP as well? Note that when I change setting to Manual IP the lease range is all blank (subnet mask, subnet IP, starting IP and Ending IP are all blank. Am I supposed to be entering something in these others as well? If so then what please?
Odd. My Subnet IP is the same as my IP address prefix: 192.168.0.0. The starting is 192.168.0.20, and the ending is 192.168.0.254 I didn't set or change any of that. Maybe leave it on Automatic, restart the eero, and try again?
SO how and where do I log in to access the EERO router and make these changes. Is it locked by the cable company? Or is there something I have access to.
Is there a LAN IP address to access it?
Same issue happening with me. I'm running a 255.255.252.0 (/22). 192.168.4.1 gateway.. up through 192.168.7.255. Everythings working, although Cox internet keeps dropping and I'm not sure if it's potentially related to this. All internal communications continue to work with out any problems.
- 2 mths agoLast active