Devices not connecting to closest eero
A quick background on my setup:
- I am running the latest version (1.4) of the iOS app
- I am running the latest firmware (2.1.0) on my three eeros.
- My first eero is connected as follows: modem -> eero --> switch
- My other two eeros are hardwired via ethernet back into the switch.
Upon updating the iOS app, I started checking to see which devices are connected to which eeros. I was surprised at what I found.
- Most of my devices are connected to the primary eero.
- An iPad in an upstairs bedroom is connected (with a weak signal) to the primary eero which is downstairs in my den even though there is an eero in the same bedroom as the iPad. (The iPad stays in that bedroom, it never wanders around the house).
- My Rachio sprinkler controller is also connected to the den eero even though there is an eero much closer to the garage.
These are not the results I expected. I thought I placed the eeros to give me strong coverage throughout the house but the devices don't seem to want to connect to the closest available eero. I also thought since I wired them via ethernet that this would give me the strongest possible mesh network possible.
Did I do something wrong in my setup? Any suggestions on how to correct this?
Eero Support, I respectfully submit that when our devices don’t connect to the Eero with the best signal strength that the value of a eero mesh network ceases to exist. When I go into my master bedroom and my iPhone connects to a Eero on the other side of the house with crappy connectivity this is a SERIOUS problem. As a baby step in the right direction, why can’t we use the Eero app to choose which device to connect to? I would tell my stupid iPhone to connect to the Eero 2 feet away rather than one on the other side of my home. While this isn’t an ideal solution, it’s a hell of a lot better than being completely shit out of luck. For the love if God, why can’t you deliver this feature?
It’s 2019 and I am also experiencing this issue with my iPhone X with most recent iOS. I get home and walk upstairs to the bedroom and my iPhone is virtually useless because it’s still connected to the living room eero. I have to constantly toggle with WiFi off and on. It’s pretty sad that for like a $500 “best in class” system and multiple years of complaints this isn’t solved.
I get that the device decides but eero could choose to disconnect devices with like 1-2 bars.
I know that good commercial grade wifi does not suffer from this. Come on eero team. You guys gotta solve this!
If you all could see my house, it would look like the matrix, but broken. 48 devices many connecting to Eeros not even close to where the devices actually live (fixed). Worse the computers where we do our business, connect to Eeros across the house (4k sq ft). Causes a lot of intermittent connectivity (VPN, Gaming, etc.)
I have 10 eeros in a 3-story 5,500 sq ft house.
Quick math-I have $2000 invested in eeros. The system performs solidly but it's connection to my iPhone XS Max is highly illogical. The eero to which it connects is the furthest one away, and the opposite side of the house, in the basement, one level below where I use my phone the most. I tried resetting the whole network, resetting my phone, resetting all network settings, turning off Bluetooth, resetting the eero to original factory settings and still it persists in insisting on connecting to the furthest-away eero.
I don't care how much "nuance" it takes for you to address and resolve this issue once and for all. You should be embarrassed to take my money or anybody else's until it is no longer a ridiculously inexcusable issue.
Same issue, frustrating. I have a 4500sqft house with 3 Base units and 2 Beacons. One Base covers the basement, and two on the main floor (either side of the house). The Beacons cover the upstairs and are at either end of the house also.
I have a Printer that is 5ft from a base unit, but it connects to the furthest Beacon, I have devices in the basement that connect to the Upstairs Beacon and if I force them off, they will reconnect over time.
My laptops (IBM, HP, Dell) refuse to hop .... If I carry one to the basement, the upstairs signal is very weak, but they stay connected.
When I had 4 Asus routers scattered around the house, all the devices would hop in a heartbeat to the closest one.
I dropped a lot of coin going to eero in order to have a seamless mesh...
I have Three main issues:
1. Roaming sucks
2. Cannot specify 2.4 or 5 for a SSID (Home Automation devices are a PITA to setup)
3. On reboot, my Beacons come up first, so everything connects to it... related to #1, the Fix is to them reboot the Beacon causing them to drop and reconnect to another AP.
My situation is even worse... I'm standing right next to my bed room device, using my iPhone I do "Forget Network", then re-connect, and it still connects to the master device in the living room, much farther away from the one I'm right next to... ?? Is this an expected behavior?? If that's the case I'm returning the box to Amazon tomorrow. All my devices are just connecting to that one master device regardless...
I’m having the same issue here, where my firetv stick will connect to the hallway eero beacon instead of the one that’s in the bedroom with the firetv stick. It’s been over 3yrs now and that issue has not been fix yet. We should be able to choose which beacon to connect. If I want to to connect to my living room beacon I should be able to do that or my bedroom beacon and so on.
If I'm connected to the closer eero and move to another room with the device still on, it never-never changes to the closest eero. Videoconferencing while you move is a nightmare. I have to turn off wifi and turn it back on. Every member of my family (6) faces this issue. So, I'm talking about 11 devices (smartphones, tablets, Nintendo Switch, Smart TVs). I have the latest software on my eero: 13.18.1
For years the eero team says the same thing:
"if you’re seeing weaker connections when there is a closer eero, you can toggle wifi off and back on for the device to connect to a closer eero. It should automatically connect to the best eero.
(Wow! That's very convenient)
Again, at the end of the day, these decisions are ultimately made by the device."
I think all my devices make bad decisions all the time.
Funny... when I use the Google mesh system (at my neighbour's house - same apartment layout), my devices start making good decisions.
Eero - It’s time to fix this. You’ve got a lot of people ready to return products. When looking at the better stability of Google’s alternative (for example) I can see that I would sacrifice speed for a better experience. Frankly, the speed with the alternative is still way more than acceptable ...more bandwidth than my home of 15 devices could ever use. So, good job on speed and awful job on experience. Are y’all actually planning a fix for this? If so, release date? If not, I like many others, will be returning. Wifi should be seemless.
txgunlover - your making me laugh. The entire purpose of the Eero is to seamlessly mesh to provide uninterrupted wifi service. I presume if I bought a car from you that didn't run, you would suggest moving all my desired destinations closer to me, so I wouldn't need a car. :-) Or you suggest I contact the grocery store to move closer to my car.
Eero - you need to fix this. This is the core of your product and it is not working! I actively tell people not to buy Eero because of this issue.