0

Using Eeros over MoCA with Xfinity Modem/Router

I set up an Eero network with 3 WIFI nodes using one eero directly connected to an ethernet port on the Xfinity Modem/Router and two other nodes connected using MoCA ethernet adapters that use the MoCA capabilities in the Xfinity router.  Since I want to use the MoCA capabilities in the Xfinity router, I can't set the Xfinity router to bridge mode. 

Should I set the Eero gateway to bridge mode?

The Eero gateway is not in bridge mode and I am seeing behavior I don't understand.  Last night, after setting everything up, nothing seemed to work — I was getting very slow speeds from the Eero WIFI nodes. Some of the nodes showed wireless connections instead of wired backhaul. I was about to return everything. I woke up this morning and everything seemed to be working great — all nodes showed wired with good speeds. I have no idea what changed.

Strangely, the eero gateway and one of the other eero nodes (MoCA connected) show 192.168.4.x ip addresses in the app, but the other eero node (MoCA connected) shows a 10.0.0.x ip address. The former look like ip addresses issued by the eero gateway but the 10.0.0.x ip address looks like it was issued by the Xfinity modem/router. I have no idea why.

Another oddity is that some of the WIFI devices seem to continuously jump between the two MoCA-attached eero nodes (according to the app), as a set. Strange.

I suspect I need to put the eero gateway in bridge mode but I would like to understand what is going on. I suppose an alternative would be to get another MoCA adapter and put everything behind the eero gateway but I'd prefer to avoid the expense.

Any ideas or suggestions?

3replies Oldest first
  • Oldest first
  • Newest first
  • Active threads
  • Popular
  • Here are my connections: Downstairs - PoE filter to 2 output splitter, one output to modem, one output to MoCA adapter which is connected via ethernet to my Eero Pro 6 gateway that is connected to an ethernet switch. Upstairs - another MoCA adapter is connected to a coax output and to another Eero Pro 6 that is connected also to an ethernet switch. Everything seems to work well. I am planning to add 1 more MoCA adapter to my remaining Eero Pro 6. 

    Like 1
  • Thanks for posting this i had some issues over it and your post help out.

    Like 2
  • Eero works with Xfinity by Comcast. To set up Eero with Xfinity, bridge the Xfinity xFi wireless gateway by logging into admin tools at10.0.0.1 and enabling bridge mode in the settings.

    Like
Like Follow
  • 8 mths agoLast active
  • 3Replies
  • 192Views
  • 4 Following

Need Help? We're here for you!

We're big on support, and we want to make sure you always have the best eero experience possible. Here are several resources you can use if you ever need our help!


Quick links

Community Guidelines

Help Center

Contact eero support

@eerosupport

eero.com