Eero blocking access to Lutron Caseta hub
I have a Lutron Caseta hub attached via Ethernet (cable) to a switch which in turn plugs into my Eero 6. The Lutron app cannot communicate with it, and it appears that the Eero is blocking it.
If I try to ping the device from a Wi-Fi device, I get
$ ping 10.0.1.151 PING 10.0.1.151 (10.0.1.151): 56 data bytes 92 bytes from 10.0.1.201: Communication prohibited by filter Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 5400 7f16 0 0000 40 01 e477 10.0.1.133 10.0.1.151
10.0.1.201 is the IP of one of the eero extenders). But if I ping it from another device connected to the same switch, I get:
$ ping 10.0.1.151 PING 10.0.1.151 (10.0.1.151): 56 data bytes 64 bytes from 10.0.1.151: icmp_seq=0 ttl=64 time=1.291 ms 64 bytes from 10.0.1.151: icmp_seq=1 ttl=64 time=0.813 ms
How do I get the Eero to allow access? The Lutron hub is not in any profile; it appears this is an Eero/Homekit thing.
Hi eero will only block direct communication like this if the receiving device is blocked/paused. Make sure it isn't. If it isn't I would suspect homekit or a firewall on the device (but with a firewall or a block I would expect no response not a filter prohibition).
- 3 wk agoLast active