MyQ garage door opener won't pair with eero
I am trying to connect my Chamberlin MyQ garage door opener to eero.
I was not able to get it to work via bluetooth, so I tried connecting the the webserver on the Hub ( setup.myqdevice.com ).
There it offers me three different connections for each of my primary and guest network. I have tried all 6 of them with WPA2-AES as the encryption.
The device will not pair with the eero not matter what I try. This is an older model MyQ, is this device known not to work with eero? It worked great with the most recent Airport Extreme tower that Apple made, so I am surprised it won't connect with eero.
Tvlas Thanks for your suggestion. I had given up on connecting myQ and when I read your instructions. I have it working. I am not sure if it was the reset or forcing my phone to connect to the same eero. I am glad it's working. Thank you!
Dnasep Thank you for showing how to force a 2.4 GHz connection temporarily. This will help many of the devices.
The person who suggested pausing the 5ghz and then turning off WPA3 did the trick for me. Pausing the 5GHZ alone didn't work, but as soon as I turned off WPA3 it worked - finally! I have spent two to 3 hours trying all the other suggestions and this was the only one that worked!
The long and short of it is that the MyQ does not support the new WPA3 protocol. In the Eero app, you'll have to turn that option off. The setting to disable WPA3 is located under Discover > Eero Labs > WPA3. Make sure that's off and your MyQ should easily find your home network.
The long and short of it is that the MyQ does not support the new WPA3 protocol. In the Eero app, you'll have to turn that option off. The setting to disable WPA3 is located under Discover > Eero Labs > WPA3
So, I've been having a very difficult time with my MyQ G0401 - has been doing the blue+green blinking thing for a long time. I even bought a second one to make sure it wasn't a broken unit. After trying the setup.myqdevice.com setup, switching off 5ghz band in the eero app - nothing. Couldn't get it to work.
Finally I tried flipping off WPA3 - that worked!
I unfortunately had so much hope after finding this thread but my garage door opener will still not pair. It used to work fine but I switched modems and ever since it hasn’t been able to pair. I tried factory resetting garage door opener, resetting Wi-Fi, turning eero to temporarily only 2.4Gz, made sure WPA3 was off, unplugged closest eero and still not connecting… anyone else find any other solution. I am very disheartened
I have a eero 6+ and the Chamberland was a bear to get set up 5 months ago. I had to call tech support and they got it to work. IIRC, i was using the wrong category of devices.
I am sorry, I should have clearer in my earlier poat.
I have the MyQ garage door opener and a MyQ hub. The hub is the interface for the MyQ device in the bedroom that tells me if the garage door is open. I got the garage door opener on the network -- accessible from my Android phone. The Hub was the problem that the Chamberlin CSR helped me with.
Decided to reply to this topic because it was one of the most frustrating things I've been through since buying an Eero Router. Once installing the router, I could not get my LiftMaster Garage Door openers to pair with the MyQ app. I tried everything. I shut off WPA3, I shut off 5G, I tried to port forward port 8883, and manually assign an IP address to the MAC address for the Garage Door Opener. It would get all the way through the set up and stall out at "Finding local Networks".....This went on and on. Finally, I decided to delete the MyQ app, re-install the app and re-login. Boom it worked like a champ...now I I also turned off "Limit IP Address Tracking" in my WIFI settings so that could have helped. I have to install one more garage door, and this time I'll try to do it with IP Address tracking on and report back if that works....
- 3 wk agoLast active