HP printer wireless setup issue
I recently installed four eeros in my home. My iMac (OSX 10.11.6 El Capitan) cannot find my printer. I am trying to connect my HP Envy 7640. The printer gives me the following message when printing the network details:
"ATTENTION: More than one access point/wireless router has been found that matches your wireless network name (SSID). If this is not intended, your HP printer may connect to the wrong wireless network. To avoid this, change your wireless network name (SSID) to be unique."
The eero app sees my printer as a connected device.
Can anyone advise?
Hi brianlscanlon —
Welcome to the eero community! I am sorry to hear the trouble you are experiencing with setting up your printer on your eero network.
If you haven't yet, I suggest taking a look at this Help Center article regarding printer setup. It provides information such as verifying your printer is supported and some basic troubleshooting.
If the issue persists, or you'd like us to take a look into what is going on, our support team is more than happy to help. Feel free to give us a call at 1-877-659-2347 or email us at email@example.com.
In case you are suffering from Epson wf-3640 printer offline errors code and failing to carry your printer back into the web mode, you can contact with our professional specialists to restoration a majority of these mistakes with perfection. But before contacting us, you can go to here
<a href="https://www.epsonprintersupport247.com/how-to-fix-epson-printer-problems-with-wi-fi-connection/"> how to connect Epson printer to wifi</a>
If You Are Troubling With Your Epson Printer Then It is end of your searching Because You are On Right Place where you can get help for your Epson products and also get solution for Epson printer errors.
Are you looking for how to perform the HP printer setup for the Windows and Mac OS via 123.hp.com/setup? Then this article is for you..!!
Install the ink cartridge to the printer
- Open the ink carriage access door to install the ink cartridge.
- Don’t make any process until the ink carriage door becomes idle.
- Be careful while you remove the tapes of the ink cartridge.
- Insert the ink cartridge to their respective slots.
- Once these steps are over close the ink cartridge door.
- The take the alignment print out and check the quality print out from the.